MAXIFORST

High performance – great results!

MAXIFORST is one of the “high performers” for felling trees, and clearing the ground after the wood harvest or after catastrophes etc. The best partners for professionals. Powerful forestry mulcher with an especially aggressive new generation patented rotor with efficient tools of the type MINI DUO™ with tungsten carbide tips. Very strong frame, for a very long life with reinforced frame and with counter knives. Great exposure of the rotor to the trees for better felling. Rakes on the hood for an easier handling of the material to be mulched. Different types of Guard frames for felling operations available.

Available working width: 250, 275, 300 cm [89″, 98″, 108″, 118″].

APPLICATIONS:

• Land clearing in the oil and gas industry
• Maintaining of power and communication lines
• Improve arable fields and other land
• Vegetation management
• Clearing forests after harvesting wood
• Right-of-way clearing

STANDARD VERSION

• Mulches wood up to 60 cm [24”] Ø
• Standard rotor: fixed tungsten carbide tips hammers MINI DUO™
• Working speed 0-5 km/h
• Bolt-on-rotor shaft
• Cat. 3 & 4 central fixed ISO 3-point rear linkage
• 1000 rpm gearbox with freewheel
• ADAM™ alignment system – Hydraulic tilting of the mulcher with PTO shaft alignment while keeping equal and W-shaped PTO shaft angles
• Double drive
• 12 belts
• Centrifugal clutch for slow start and protection of the PTO shaft
• Integrated cooling circuit
• Hydraulically operated hood
• Skids, adjustable in height by 5 cm [2”], reinforced with plates made of hard metal
• Front & rear protection: triple / single chains
• Colour: red RAL 3020

OPTIONS

• PTO drive shaft
• Fixed knives rotor with MONO PROTECT™ + MONO EXTREME™
• Mechanical or Hydraulic guard frame – several types of choice

And other options of choice.Video Player

MINIFORST

The forestry brush cutter MINIFORST may be fitted to small and medium horse power tractors. It mulches brush and wood up to 20 cm [7.9”] in diameter with ease! The hydraulic hood controls the degree of mulch. Standard rotor with forestry fixed hammer-MINI DUO rotor with tungsten carbide tips. Patent-registered hammer support with side protection.

Ideal for small scale vegetation management and right-of-way maintenance.

Available working width: 125, 150, 175, 200 [49″, 59″, 69″, 79″].

STANDARD VERSION

• Mulches brush and wood up to 20 cm [7.9”] Ø
• Working speed 0-5 km/h
• Cat. 2 central fixed ISO 3-point linkage
• 1000 rpm gearbox with freewheel & cross shaft
• 5 belts
• Hydraulic rear hood
• Front and rear protection: double chains
• Skids, adjustable in height by 2,5 cm [1”], reinforced with hard metal plates
• Standard rotor: Forestry fixed hammer-MINI DUO rotor with tungsten carbide tips

OPTIONS

• PTO drive shaft
• Forestry rotor with swinging hammers
• Forestry fixed hammers rotor MINI BLADE
• Rotor with SMO hammer
• Front attachment
• 540 rpm gearbox
• Mechanical guard frame

And other options of choice.Video Player

Superforst

The professional forestry mulcher for any type of vegetation management.

SEPPI forestry mulchers SUPERFORST and MAXIFORST are the “high performers” for felling trees, and clearing the ground after the wood harvest or after catastrophes etc. The best partners for professionals. Very strong chassis, for a very long life with counter knives. Fixed hammer rotor with bolt-on-rotor shaft. 

SUPERFORST mulches wood up to 50 cm [20”] Ø. Very strong chassis, for a very long life with reinforced chassis and with counter knives.

Alignment system for transmission by SUPERFORST – ADAM™ – Hydraulic tilting of the mulcher by gear tracking with PTO shaft alignment. With the W-shaped angles the range of motion increases and the mulcher can be moved up- and downwards even higher. This angular adjustment protects the PTO shaft and the input shaft even at high loads and supports an ideal adaptation to the conditions of the roads.
Advantages: longer service life of PTO and input-shaft, even deeper digging, working with an hydraulic alignment system is easier and faster.

New: rotor shaft with tools with a single tooth in very aggressive carbide – the MONO TIP V-LOCK. This rotor is even more efficient on large logs and thicker
wood.

The advantages of the new MONO TIP V-LOCK rotor:
– Less rotor wear
– Better balancing
– Tool change made even easier
– Optimised connection between tool and holder

Available working width: 200, 225, 250 cm [79″, 89″, 98″].

APPLICATIONS:

• Land clearing in the oil and gas industry
• Maintaining of power and communication lines
• Improve arable fields and other land
• Vegetation management
• Clearing forests after harvesting wood
• Right-of-way clearing

SUPERFORST – STANDARD VERSION

• SUPERFORST mulches wood up to 50 cm [20”] Ø
• Standard rotor: fixed tungsten carbide tips hammers MINI DUO
• Bolt-on-rotor shaft
• Working speed 0-5 km/h
• ISO 3-point rear linkage cat. 3 central articulated
• 1000 rpm gearbox with freewheel
• ADAM™ alignment system – Hydraulic tilting of the mulcher with PTO shaft alignment
• Double drive
• 10 belts (2×5)
• Hydraulically operated hood
• Skids, adjustable in height by 5 cm [2”], reinforced with plates made of hard metal
• Front and rear protection: triple / single chains
• Colour: red RAL 3020

OPTIONS

• PTO drive shaft
• Rotor V-LOCK with fixed tungsten carbide tips hammers MONO TIP V-LOCK
• Front attachment
• Mechanical or hydraulic guard frame
• Guard frame with rakes
• Centrifugal clutch for slow start and protection of the PTO shaft

And other options of choice.Video Player

Starforst

The tree shredder / mulcher STARFORST is a compact and powerful forestry mulcher with an especially aggressive new generation patented rotor with efficient combination of  fixed hammers type MINI DUO + MONO EXTREME with tungsten carbide tips. Innovative 3-point linkage with self-aligning mechanism makes it easy to maneuver. Very strong frame, for a very long life with reinforced frame made of wearresistant steel. High performance with minimum energy consumation thanks to its lightweight construction. This versatile forestry mulcher is suitable for PTO-tractors between 180 and 300 HP.

Strong & reliable for professional vegetation management such as land clearing, right-of-way management, site prep, creation of fire breaks, road side maintenance, pipeline and power transmission maintenance.

STARFORST – The top choice in forestry mulchers is showing itself in a whole new light.  The model, which has been popular for over 10 years, has undergone major changes. The new STARFORST with its new overall working width is perfectly suited to tractors and road traffic. And so the STARFORST is relaunched with working widths of 210, 235 and 260 cm. Every centimetre of the tractor’s width is covered, and the ground is worked uniformly.  But this is just one of the innovations that distinguishes STARFORST. Another novelty is the decision by SEPPI M. to introduce a new rotor shaft with tools with a single tooth in very aggressive carbide – MONO TIP V-LOCK. This rotor is even more efficient on large logs and thicker wood. A new system of tools is also being introduced; the V-Lock!

The advantages of the new MONO TIP V-LOCK rotor:

• Less rotor wear
• Better balancing
• Tool change made even easier
• Optimised connection between tool and holder

In addition to restyling the design and tilting system ADAM for the transmission, already found on the standard version, the forestry machine has been further equipped against wear. Inside the casing there are anti-wear plates in HARDOX® material, which can be substituted. This feature has already been applied to SEPPI M. stone crushers and tillers. In addition, the protection belts with material deflector and tempered steel anti-wear skids offer further protection to the machine.

In this simple, functional and practical design there is now that much more power!

NEW: Overall width adapted to road traffic regulations – for an optimal use of the working width!

NEW available working width: 210, 235, 260 cm [83″, 93″, 102″].

APPLICATIONS:

• Land clearing in the oil and gas industry
• Maintaining of power and communication lines
• Improve arable fields and other land
• Vegetation management
• Clearing forests after harvesting wood
• Right-of-way clearing

STARFORST – STANDARD VERSION

• Mulches wood up to 40 cm [16”] Ø
• Standard rotor: fixed tungsten carbide tips hammers MINI DUO + MONO EXTREME
• Bolt-on-rotor shaft
• Working speed 0 – 5 km/h
• ISO 3-point rear linkage cat. 3 central articulated
• 1000 rpm gearbox with freewheel
• ADAM™ alignment system – Hydraulic tilting of the mulcher with PTO shaft alignment while keeping equal and W-shaped PTO shaft angles
• Double drive (10 belts)
• Hydraulically operated hood
• Skids, adjustable in height by 5 cm [2”], reinforced with plates made of hard metal
• Front and rear protection: quadruple/ single chains
• Colour: red RAL 3020

OPTIONS

• PTO drive shaft
• Fixed knife rotor MONO TIP V-LOCK
• Mechanical or hydraulic guard frame
• Hydraulic guard frame with tools
• Centrifugal clutch for slow start and protection of the PTO shaft

And other options of choice.

Video Player

MIDIFORST

The forestry brush cutter MINIFORST may be fitted to small and medium horse power tractors. It mulches brush and wood up to 20 cm [7.9”] in diameter with ease! The hydraulic hood controls the degree of mulch. Standard rotor with forestry fixed hammer-MINI DUO rotor with tungsten carbide tips. Patent-registered hammer support with side protection.

Ideal for small scale vegetation management and right-of-way maintenance.

Available working width: 125, 150, 175, 200 [49″, 59″, 69″, 79″].

STANDARD VERSION

• Mulches brush and wood up to 20 cm [7.9”] Ø
• Working speed 0-5 km/h
• Cat. 2 central fixed ISO 3-point linkage
• 1000 rpm gearbox with freewheel & cross shaft
• 5 belts
• Hydraulic rear hood
• Front and rear protection: double chains
• Skids, adjustable in height by 2,5 cm [1”], reinforced with hard metal plates
• Standard rotor: Forestry fixed hammer-MINI DUO rotor with tungsten carbide tips

OPTIONS

• PTO drive shaft
• Forestry rotor with swinging hammers
• Forestry fixed hammers rotor MINI BLADE
• Rotor with SMO hammer
• Front attachment
• 540 rpm gearbox
• Mechanical guard frame

And other options of choice.Video Player

MIDIFORST dt

The brush shredder MIDIFORST dt is the most classical forestry mulcher. Its universality makes it suitable for the most varied uses:

• In forestry industries for right-of-way management, creation of fire breaks, vegetation management, road side maintenance…
• In construction for land clearing and site prep…
• In agriculture for the renewal of orchards,
• Removal of dead plants trees in gardens
• …

This tree shredder/mulcher comes with a two end belt drive. MIDIFORST dt mulches wood up to 30 cm [11.8”] Ø. The components of the transmission are protected under a door that may be opened for servicing. The MIDIFORST dt mulcher is well protected from dirt, dust, water and strikes.  Fixed hammer rotor in standard version with optimized combination of fiexed tools MINI DUO + MONO EXTREME and bolt-on-rotor shaft.

ADAM – Hydraulic tilting of the mulcher by gear tracking with PTO shaft alignment. With the W-shaped angles the range of motion increases and the mulcher can be moved up- and downwards even higher. This angular adjustment protects the PTO shaft and the input shaft even at high loads and supports an ideal adaptation to the conditions of the roads. Advantages: longer service life of PTO and input-shaft, even deeper digging, working with an hydraulic alignment system is easier and faster.

Available working width: 200, 225, 250 cm [79″, 89″, 98″].

 New: rotor shaft with tools with a single tooth in very aggressive carbide – the MONO TIP V-LOCK. This rotor is even more efficient on large logs and thicker wood.

The advantages of the new MONO TIP V-LOCK rotor are:
– Less rotor wear
– Better balancing
– Tool change made even easier
– Optimised connection between tool and holder

MIDIFORST dt – STANDARD VERSION

• Mulches wood up to 30 cm [11.8”] Ø
• Standard rotor: combination of fixed tungsten carbide hammers MINI DUO + MONO EXTREME; anti-wear hammer support
• Working speed 0-5 km/h
• Cat. 2 central fixed ISO 3-point linkage
• 1000 rpm gearbox with freewheel & cross shaft
• Input shaft 1 3/4” Z=6
• Double drive
• 10 belts (2×5)
• Reinforced frame
• Hyd. rear hood
• Skids, adjustable in height by 5 cm [2”], reinforced with hard metal plates
• Front and rear protection: chains
• Colour: red RAL 3020

OPTIONS

• PTO drive shaft
• Swinging hammer rotor 
• Fixed hammer rotor MONO TIP V-LOCK + PROTECT
• Front attachment
• Mechanical or hydraulic guard frame
• Centrifugal clutch
• ADAM™ Hydraulic tilting of the mulcher with PTO shaft alignment while keeping equal and W-shaped PTO shaft angles

And other options of choice.Video Player

MIDIFOREST

The brush shredders MIDIFORST™ and MIDIFORST dt™ are the flag ships of the SEPPI M. brand. Powerful and at the same time compact, these forestry mulchers are suitable for the most varied application – in forestry, in agriculture and in greenspace maintenance. With the new generation patented rotor with efficient MINI DUO™ tools with additional tungsten carbide inserts MIDIFORST dt mulchs wood up to 25 cm [9.8”] Ø.

Ideal for fire breaks, vegetation management, right-of-way, land clearing, site preparation, pipelines and power transmission lines as well as for road side maintenance.

Available working width: 175, 200, 225 cm [69″, 79″, 89″].

STANDARD VERSION

• Mulches wood up to 25 cm [9.8”] Ø
• Standard rotor: with fixed hammers MINI DUO with tungsten carbide tips;
• with Bolt-on-rotor shaft
• Working speed 0-5 km/h
• Cat. 2 central fixed ISO 3-point linkage
• 1000 rpm gearbox with freewheel
• Single drive
• 5 belts
• Reinforced frame
• 3 rows of tempered counter knives for a perfect mulching result
• Hydraulically operated hood
• Skids, adjustable in height by 6 cm [2.4”], reinforced with hard metal plates
• Front and rear protection: double / single chains
• Colour: red RAL 3020

OPTIONS

• PTO drive shaft
• Rotor with forestry swinging hammers
• Swinging hammer rotor with tungsten tips
• Rotor 
• Front attachment
• 540 rpm gearbox
• Rake hood
• Mechanical guard frame
• Centrifugal clutch

And other options of choice.Video Player

WBS FH

To satisfy all your needs without any compromise, go for the WBS mulcher! The WBS mulching mowers are the strongest in the series of SEPPI M. flail mowers. They will do the toughest work in agriculture, especially where mulching particularly resistant material, such as olive and citrus brush. Ideal for small scale vegetation management and right-of-way maintenance, used also in the forestry.

Very strong gear box for middle and high-power tractors, casing made of wear-resistant steel and strong belt protection for high performance jobs.

The WBS fh is with linkage with hydraulic side shift. The mulcher can be side shifted by 2 x 35 cm [2 x 14“] left and right of the central position.

Available working width: 225, 250, 275, 300, 350 cm [89″, 98″, 108″, 118″, 138″].

STANDARD VERSION

• Mulches grass and prunings up to 11 cm [4.3”] Ø
• Standard rotor with SMO flails
• Working speed 3–10 km/h
• Reversible cat. 2 ISO 3-point linkage
• Linear hydraulic side shift 70 cm [28”]
• 1000 rpm gearbox with freewheel and through shaft
• Input shaft 1 3/8” Z=6
• 5 belts
• Adjustable rear hood with rubber protection
• Reinforced support roller, adjustable in height by 5 cm [2”]
• Front protection: chains
• Colour: red RAL 3020

OPTIONS

• 540 rpm gearbox
• Additional 3-point linkage
• Rear hood with rakes
• Pick-up system

And other options of choice.

S9 Coupe

The new “S9 coupe” is a low profile model with strong hydraulic side shift on corrosion resistant tubes, with low belt protection for vineyards and orchards.

The NEW S9 series opens the heavier range of SEPPI M. flail mowers. This NEW line is replaceing of OLS – OLS S series.

The result of 75 years of Innovation: more power, more lifetime, more productivity!

Casing made of high-tensile steel (S420), with internal replaceable wear plates, reinforced belt cover and strong, unique roller design using a double tapered roller bearing unit for a long life and the low maintenance costs. S9 machines mulch grass and vegetation up to 9 cm [3.5”] Ø. The rear hood allows adjustment of the degree of mulching.

Helical distributed and high resistent flails for universal use are for high cutting quality at uniformly distributed power. Double counterknives inside the casing will give a perfect result when mulching. Strong welded belt cover minimizes accidental damage. With the roller positioned close to the rotor, it is automatically cleaned by the rotating flails and the cut material is evenly distributed over the top of the roller. Adjustable large diameter roller positioned close to the rotor improves mulching on uneven ground and prevents scalping.

The S9 mulchers are suitable for the most varied uses: in agriculture for orchards, right-of-way management, creation of fire breaks, vegetation management, road side maintenance, land clearing and site prep…

Available working width: 200, 225, 250, 275, 300 cm [79″, 89″, 98″, 108″, 118″].

STANDARD VERSION

• Mulches grass and prunings up to 9 cm [3.5”] Ø
• Standard rotor with SMO flails
• Rotor wall thickness: ≤ 250: 12,5 mm [031⁄64in] · ≥ 275: 16 mm [05⁄8in]
• Working speed 3-10 km/h
• ISO 3-point linkage cat. 2
• Linear hydraulic side shift 70 cm [28”]
• Low belt protection for vineyards and orchards
• Gearbox 1000 rpm with freewheel and through shaft
• Input shaft 1 3/8” Z=6
• Reinforced support roller, adju

S9 Dyna

The new “S9 dyna” is reversible model with Linkage with strong hydraulic side shift on corrosion resistant tubes. Innovative, pyramid-shaped 3-point linkage with high stability is suitable for front and rear attachment.

The result of 75 years of Innovation: more power, more lifetime, more productivity!

The NEW S9 series opens the heavier range of SEPPI M. flail mowers. This NEW line is replaceing of OLS – OLS S series.

S9 casing made of high-tensile steel (S420), with internal replaceable wear plates, reinforced belt cover and strong, unique roller design using a double tapered roller bearing unit for a long life and the low maintenance costs. S9 machines mulch grass and vegetation up to 9 cm [3.5”] Ø. The rear hood allows adjustment of the degree of mulching.

Helical distributed and high resistent SEPPI flails for universal use are for high cutting quality at uniformly distributed power. Double counterknives inside the casing will give a perfect result when mulching. Strong welded belt cover minimizes accidental damage. With the roller positioned close to the rotor, it is automatically cleaned by the rotating flails and the cut material is evenly distributed over the top of the roller. Adjustable large diameter roller positioned close to the rotor improves mulching on uneven ground and prevents scalping.

The S9 mulchers are suitable for the most varied uses: in agriculture for orchards, right-of-way management, creation of fire breaks, vegetation management, road side maintenance, land clearing and site prep…

Available working width: 200, 225, 250, 275, 300 cm [79″, 89″, 98″, 108″, 118″].

S9 dyna – STANDARD VERSION

• S9 Mulches grass and prunings up to 9 cm [3.5”] Ø
• Standard rotor with SMO flails
• Rotor wall thickness: ≤ 250: 12,5 mm [031⁄64in] · ≥ 275: 16 mm [05⁄8in]
• Working speed 3-10 km/h
• ISO 3-point linkage cat. 2 reversible
• Linear hydraulic side shift 70 cm [28”]
• Gearbox 1000 rpm with freewheel and through shaft
• Input shaft 1 3/8” Z=6
• Reinforced support roller, adjustable in height by 5 cm [2”]
• Adjustable rear hood with rubber protection
• Front protection with chains
• Colour: red RAL 3020

OPTIONS

• PTO drive shaft
• Gearbox 540 rpm
• Gearbox with manual inverter for reversible tractors
• Belt cover on the right for working on the left
• Rubber gauge wheels

And other options of choice.Video Player