S9 Base
The new S9 series opens the heavier range of SEPPI M. flail mowers. This NEW S9 line is replaceing of OLS serie.
The result of 75 years of Innovation: more power, more lifetime, more productivity!
The “S9 base” is the basic SEPPI mulcher model without side shift , with ISO 3-point linkage cat. 2 central fixed for reversible job. The hitch is easy changeable to change fast the working direction.
S9 casing is made of high-tensile steel (S420), with internal replaceable wear plates, reinforced belt cover and strong, unique roller design using a double tapered roller bearing unit for a long life and the low maintenance costs. S9 machines mulch grass and vegetation up to 9 cm [3.5”] Ø. The rear hood allows adjustment of the degree of mulching.
Helical distributed and high resistent SEPPI flails for universal use are for high cutting quality at uniformly distributed power. Double counterknives inside the casing will give a perfect result when mulching. Strong welded belt cover minimizes accidental damage. With the roller positioned close to the rotor, it is automatically cleaned by the rotating flails and the cut material is evenly distributed over the top of the roller. Adjustable large diameter roller positioned close to the rotor improves mulching on uneven ground and prevents scalping.
The S9 mulchers are suitable for the most varied uses: in agriculture for orchards, right-of-way management, creation of fire breaks, vegetation management, road side maintenance, land clearing and site prep…
Available working width: 200, 225, 250, 275, 300 cm [79″, 89″, 98″, 108″, 118″].
NEW: S9 base is possible also with hyd. transmission for hydraulic track loader!
S9 base – STANDARD VERSION
- S9 base mulches grass and prunings up to 9 cm [3.5”] Ø
- Rotor with SMO flails
- Rotor wall thickness: ≤ 250: 12,5 mm, ≥ 275: 16 mm
- Working speed 3-10 km/h
- ISO 3-point linkage cat. 2 central fixed reversible
- Gearbox 1000 rpm with freewheel and through shaft
- Input shaft 1 3/8” Z=6
- Reinforced support roller, adjustable in height by 5 cm [2”]
- Adjustable rear hood with rubber protection
- Front protection with chains
- Colour: red RAL 3020
OPTIONS
- PTO drive shaft
- Gearbox 540 rpm
- Gearbox with automatic inverter for reversible tractors
- Additional 3-point linkage frame
- Hyd. trasmission for hy. track loader
- Rubber gauge wheels
And other options of choice.Video Player
Midisoil DT
With the NEW universal STONE CRUSHER and soil tiller MIDISOIL dt – the little brother of the STARSOIL, you can do many things: crush rock, stabilize the soil, grind stumps, mulch wood, and recycle paving material.
The MIDISOIL dt is an new multifunctional crusher-tiller-mulcher for middle PTO-tractors. It comes with a new, innovative two-option linkage hitch, with a stronger transmission and additional crushing bars.
It features:
Reinforced frame made of wear-resistant steel for a very long life
Chassis with internal replaceable plates.
Row of tempered counter knives for a perfect crushing result
New
generation patented rotor with efficient tool combination of the new
type, SUPER MONO PROTECT™ and SUPER MONO EXTREME™ with additional
tungsten carbide inserts at points most subject to wear.
Anti-wear knife supports.
MIDISOIL dt can work at 1000 rpm with 1 or 2 speeds. That means that the rotor system can be changed depending on the job from approx. 1000 rev/min (mulching wood) to 540 rev/min (for stone crushing and soil tilling) maintaining the speed of the PTO shaft of the tractor at 1000 rev/min.This feature allows for a higher torque and hence better processing both during mulching wood (fast pace) and milling rocks and soil (slow pace).
In the 2 speed version the MIDISOIL dt is (225 and 250 cm working width) equipped with an ADAM™ alignment system – hydraulic tilting of the mulcher with PTO shaft alignment while keeping equal and W-shaped PTO shaft angles. This prevents damage to the PTO shaft and supports an ideal adjustment to the conditions of the ground -> faster working, better results, longer lifetime of the PTO shaft, and higher lifting.
Available working widths: 175, 200, 225, 250 cm [69″, 79″, 89″, 99″].
APPLICATION
- Crushing stones on roads, farms and other areas
- Creating and maintaining gravel roads
- Land clearing for the oil and gas industry
- Maintaining power and communication lines
- Improving arable fields and other land
- Preparing soil for (re)planting
- Vegetation management
- Clearing forests after harvesting wood
- Right-of-way clearing
STANDARD VERSION
- Crushes stones up to 20 cm [8”] Ø
- Mulches wood and stumps up to 30 cm [12”] Ø
- Tills the soil as deep as 20 cm [8”] and deeper, depending on the working conditions
- Rotor combination of tungsten carbide tips hammers SUPER MONO PROTECT™ + SUPER MONO EXTREM™ with anti-wear knife support
- Bolt-on-rotor shaft
- Working speed 0–2 km/h
- Required creeper gear: max. 0,5 km/h
- ISO 3-point rear linkage cat. 3 central fixed
- 1000 rpm gearbox
- Input shaft: 1 3/4” Z=6
- Double drive with parallel gear transmission and integrated cooling circuit
- Integrated torque limiter
- Hydraulically operated hood with grader blade
- Adjustable anvil bar & crushing grid to adjust the degree of crushing
- Replaceable anti-wear chassis
- Narrow in-depth skids
- Protection: double chains
- Colour: red RAL 3020
OPTIONS
- PTO drive shaft
- 2 SPEED gear + ADAM™ alignment system – Hydraulic tilting of the mulcher with PTO shaft alignment while keeping equal and W-shaped PTO shaft angles
- (available for 225 and 250 cm working width)
- Hydraulically operated compacting roller for depth control, may also be used as guard frame
- Adjustable grader blade
- Skids with dig in leading edge
And other options of choice.Video Player
00:0005:14
MIDIPIERRE Stone dt
With this SEPPI stone crusher you can do so many things: crush rock, stabilize the soil and recycle paving material as solid road base. Save huge material and material transport costs with this very efficient machine!
The SEPPI MIDIPIERRE dt
is an upgraded version of the former MIDIPIERRE way. It comes with a
new, innovative two-option linkage hitch, with a stronger transmission
and additional crushing bars. The highlight is a new and more inclinable
grader blade with pressure gauge. Very strong frame, for a very long
life with reinforced frame made of wear-resistant steel. Available with
Grader blade (option) with hydr. height and rotation adjustment and
hydraulic-pneumatic damping incl. lateral extensions.
SEPPI MIDIPIERRE dt is equipped with a new generation patented rotor
with efficient tool combination of the new type, SUPER DUO PROTECT™ and
SUPER DUO EXTREM™ with additional tungsten carbide inserts at points
most subject to wear. Anti-wear knife supports. Very strong chassis, for
a very long life with reinforced chassis made of high tensile and
wear-resistant steel AR400 with internal replaceable plates.
Technical requirements for operating a SEPPI stone crusher on a tractor are creep speeds (max. 0,5 km/h) and a hydraulic three-point tractor linkage.
Available working width: 175, 200, 225 cm [69″, 79″, 89″].
APPLICATION
- Creation and maintenance of gravel roads
- Renewal of parking lots and other public areas
- Preparation of the soil on ski slopes
- Milling ice on roads
- Prepare soil for (re)planting
- Right-of-way clearing
- Brush on construction sites
MIDIPIERRE dt – STANDARD VERSION
- Crushes stones up to 20 cm [8”] Ø
- Tills the soil as deep as 12 cm [4.7”] and deeper, depending on the working conditions
- Rotor: combination of tungsten carbide tips hammers SUPER DUO PROTECT + SUPER DUO EXTREME anti-wear knife supports
- Bolt-on-rotor shaft
- Working speed 0–2 km/h
- Cat. 2 central fixed ISO 3-point linkage – asymmetric for two attachment options
- 1000 rpm gearbox
- Double drive
- Hydraulically operated hood
- Chassis with internal replaceable plates made of wear-resistant steel
- Adjustable anvil bar & crushing grid to adjust the degree of crushing
- Skids, adjustable in height
- Side skids for collecting material
- Front and rear protection: double chains
- Colour: red RAL 3020
OPTIONS
- PTO drive shaft
- Adjustable grader blade, includes pressure gauge and lateral extensions
- Hydraulic top link
- 750 rpm or 540 rpm gearbox
And other options of choice.Video Player
00:0006:12