SEPPI SMG multipla

SEPPI SMG multiplaSEPPI SMG multipla


flail mulcher for large areas
70-160 HP*

A dream of a mulcher: large areas in short time.


The SEPPI SMG multipla consists of two side mulchers, mounted on a central hitch. Both machines have angling from +90° to -60°, even while working. With a third mower mounted either on the 3-point linkage or on the front of the tractor, the working width can be as much as 7 m [276“]. Make your machine park complete with a SMG multipla!
The SEPPI SMG multipla, is made of two separate wing mulchers linked to a central 3-point linkage, will angle from +90° to -60°. For transport and parking, the machines can be lifted. In combination with an OLS fh mulcher, the SMG multipla is ideal for maintaining large areas.



  • mulches grass and prunings up to 8 cm [3,15“] Ø
  • working speed 3-7 km/h
  • cat. 2 ISO 3-point linkage
  • composition of the machine: two wing mowers to be used in conjunction with central mower
  • recommended central mower, for independant use: OLS fh 275
  • 1000 rpm trasmission with through shaft
  • input shaft 1 3/4” Z=6
  • number belts: 2 x 4
  • adjustable rear hood with rubber protection
  • functions of the hydraulic system with solenoid valves and remote control: 
    (1) lifting the central, left and right machine
    (2) parking hitch
  • required hydraulic connections: 3 double acting
  • front protection: chains
  • standard rotor with flails up to L=625: SMO, L=675: SMW


  • PTO drive shaft with freewheel
  • 540 rpm gearbox
  • additional cat. 2 3-point linkage
  • reinforced roller
  • roller scraper
  • accumulator to adapt the contours of the ground
  • chevrons


SEPPi Mulcher

FSI Stump Grinder

Reverse Drive Tractor

FSI Stump